Click here for menu

How To Fix Port Forwarding Wrt54g Not Working (Solved)

Home > Port Forwarding > Port Forwarding Wrt54g Not Working

Port Forwarding Wrt54g Not Working

Contents

http://www.youtube.com/watch?v=tRU10ZdPU7Q Title is: LAN to LAN (vs) WAN to LAN. I ensure that the pc picks up the correct IP address by limiting thedhcp range within the router!Cheers,Dave Share this post Link to post Share on other sites Switeck 1 Añadir a ¿Quieres volver a verlo más tarde? so i'll be able to listen to the radio without being tied down to only being able to listen to it at home & my local network? navigate here

As I said before, this problem started the very day I changed my router It's very discouraging to me, lol. Please help me. I have the port on the exception list, and I turned the firewall off and checked, nothing. Advertisements do not imply our endorsement of that product or service. https://community.linksys.com/t5/Wireless-Routers/WRT54G-Port-Forwarding-Not-Working/td-p/300768

Linksys Wrt54gl Port Forwarding

Later I started reading up on iptables command, it seems like a very powerful feature. Iniciar sesión Estadísticas 48.638 visualizaciones 68 ¿Te gusta este vídeo? Report • Related Solutions› Port forwarding problem since upgrade to BT Fibre broadband › [Solved] NETGEAR Router (Port Forward problem) › all my ports are reported closed › [Solved] 25565 Port I have also setup my computer's network connection to use always the ip mentioned above, as in a static ip configuration.

It works fine if I try on the same network. Dunkelschub 378.928 visualizaciones 3:13 Configure linksys Router for Remote Desktop Connection - Duración: 4:34. I don't think that that is the main problem because ssh connections on port 22 also do not go through even though the router doesn't use that port.Quote from: FurryNutz on Stay logged in LinksysInfo.org Forums > Cisco/Linksys Hardware > Cisco/Linksys Wireless Routers > Forums Forums Quick Links Recent Posts Resources Resources Quick Links Most Active Authors Latest Reviews LinksysInfo Store Members

I've yet to master it. I've tried www(port 80), etc, etc and nothing works. Sometimes it decides to forward properly, sometimes not.

Setup/NetworkingEnsure devices are set to auto obtain an IP address.Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall.Enable uPnP and Multi-cast Streaming under Advanced/Networking.

I was thinking about trying iptables, as mentioned in the following post, but I believe that requires the HyperWRT firmware. Similar Threads - Solved Port forwarding problem in port forwarding arpit35, Sep 14, 2016, in forum: Networking Replies: 5 Views: 174 arpit35 Sep 15, 2016 Designated Undesignated & Root Ports joelemon, Thanks manxi, Jun 23, 2005 #12 malfeasance Network Guru Member Re: Port Forwarding YO! When I have got it setup(like in my previous post), the router connects and extracts all the details from the ISP and then I connect my laptop to the router as

Open Port Checker

Share this post Link to post Share on other sites davexnet 0 Member Established Members 0 29 posts Posted September 10, 2007 · Report post Switeck,I run a Linksys wrt54gl Share this post Link to post Share on other sites Go To Topic Listing Troubleshooting All Activity Home µTorrent (for Windows) Troubleshooting Port Forwarding Problem (Linksys WRT54G) Contact Us Community Software Linksys Wrt54gl Port Forwarding That is exactly what I'm looking to do, but for some reason I can't seem to find out how. Whatismyip After this I first proceed to telnet to my ISP's CGI server, and then telnet back into to my static IP assigned by my ISP( this has always worked in the

Part of the Description: To help deconfuse people I setup my network both ways.#3 You are not trying to forward the same port to both computers (For example: Forwarding port 6111 http://brsgrp.com/port-forwarding/port-forwarding-on-dd-wrt-not-working.html My experience with the reset button is that 99% of the time it works with 30 seconds, and the other 1% it takes a little more time and patience to chase I know it's well configured because It works inside the lan only. I simply cannot connect to my FreeBSD from an external system.

All is still fine. I even had the technician remote access my router and he could never get it to work. I'm not using any firewall software. his comment is here Oh, and yes, I upgraded firmware, did reset's and all that.

One of the 'Great Magnet's' finest gifts to mankind! I sent some text, and the text was received. Just curious if it's different from US versions.

The telnet command works great from my computer, but I have not been able to test it from another computer in the network.

all netmasks are ok, I can ping the machine from the route and the port forward is working for the lan only. I have tried a lot of firmware, but nothing works. Thank you! Share this post Link to post Share on other sites Switeck 1 Advanced Member Established Members 1 24,331 posts Posted September 11, 2007 · Report post Maybe that website is

however when I login to my external CGI server at my ISP's side and reconnect to my FreeBSD box, it cannot connect at all. Should I report it? Yes, my password is: Forgot your password? weblink Acción en curso...

How do you know when a politician is lying? This can bring around a recalcitrant router sometimes, before flashing is necessary. I even tried disabling the Firewall setting in the Security section. I just can't port forward anything.

Sometimes 90 seconds; then unplug and let them have some time to escape, etc.... Acción en curso... Report • #11 guapo November 12, 2011 at 18:21:38 Open the web interface of the router again. giovarmani, Mar 1, 2011 #5 TerryNet Terry Moderator Joined: Mar 23, 2005 Messages: 72,182 You don't need port forwarding or your public IP address when you are using your local network.

when i have it at 192.168.1.104 doesnt that mean that the people on my local network can only connect to it? Better still, you can activate HTTPS on the routers behind the AP and forward port 443 on the AP's forwarding page, the port for HTTPS. Also my ISP has four static IP's assigned to me. All Rights Reserved Tom's Hardware Guide ™ Ad choices

I wonder what other differences there might be, other than the original firmware allowing 13 channels by default? Do you think its necessary for me to post the traceroute output? –Severo Raz Jan 17 '12 at 1:19 | show 10 more comments Your Answer draft saved draft discarded The only thing who works on this WRT54G is internet Gateway no port forwarding are able to work! This was because the WAN side of the NETGEAR384G was assigned one of four static IP by my ISP and it would only respond to the IP number it was assigned

Off-Topic Tags How-tos Drivers Ask a Question Computing.NetForumsNetworkingRouters and Switches port forwarding on linksys WRT54G Tags:linksysip addressnetwork aravindk November 11, 2011 at 13:25:38 Specs: Windows 7 Port forwarding on my linksys StephenCTracy 225.174 visualizaciones 7:18 Netgear Port Forwarding - Duración: 10:47. Eli the Computer Guy 506.171 visualizaciones 16:30 Port Forwarding - Simple and complete tutorial - Duración: 9:11. When i installed the program, Broadwave auto configured it to that ip address.

Reproducción automática Si la reproducción automática está habilitada, se reproducirá automáticamente un vídeo a continuación. External ip address: 69.117.132.xxxPorts from 8080 through 8080 forwardedInternal ip address: 192.168.1.150 - static ip address assigned to the webserver. Trying to forward a port sometimes works immediately, sometimes not for days.